In this article we will explain about "How To Reset Canon i560 and Canon i560X Printer". We will guide you step by step about how to reset your printer with easy method.
Every time when your printer run on print activities, it takes ink from the cartridge then drain it through the printhead to try cleanning any blockages. When it through the printhead, this Ink ends and gatherers in waste ink tanks, the last place of nonfunction ink.
Every time when your printer run on print activities, it takes ink from the cartridge then drain it through the printhead to try cleanning any blockages. When it through the printhead, this Ink ends and gatherers in waste ink tanks, the last place of nonfunction ink.
Waste ink tanks is full, when the printer have printed a certain number of pages. If it is full, the printer will give information to users about this situation. But in the fact, before it is full the printer should be reset.
Cause of The Printer Should be Reset:
There are several causes that require the printer to be reset:
If you after follow instuction points (1) to (7) but the green light not light by constantly but the printer show an error in continues times, maybe you made a Mistake on one of those seven points. Please repeat from the (1) to (7) point again.
[Note]: Another command for points (1) of Method (3):
[Note]: If you still meet the error in your printer, solve and repeat to reset its acording this intruction.
- Waste ink tank full.
- Waste ink pad full.
- The ink absorber is almost full.
- Error 5B00.
- Error p07.
Printer Models:
- Canon i560
- Canon i560X
Step To Reset Canon i560 and Canon i560X Printer:
You can reset this page counter by following the instructions below, and select one of the three instructions:
Method 1:
- Turn off the printer. Do it with press the [Resume/Cancel] buttom and the [Power] buttom. Do not release the buttons.
- Release the [Resume/Cancel] button. Do it while holding the [Power] buttom. (Do not release the Power buttons.)
- Release the [Resume/Cancel] button three times. Do it while holding the [Power] buttom. After that release both the [Power] and [Resume/Cancel] buttons simultaneously. During initialization, the LED blinks in green.
- When the LED stops blinking and lights in green, press the [Resume/Cancel] button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
- Press the [Power] button. When the [Power] button is pressing, the LED lights in green, and the selected function is performed.
- Turn off the printer.
- Turn on back the printer and then test it.
Method 2: (Enter Service Mode)
- Turn off the printer.
- Press and hold the [Resume] button.
- Press and hold the [Power] button.
- Release the [Resume] button (the [Power] button is still pressed).
- Press and releasing the [Resume] button one time.
- Press and hold the [Resume] button.
- Release the [Power] and [Resume] buttons together.
If you after follow instuction points (1) to (7) but the green light not light by constantly but the printer show an error in continues times, maybe you made a Mistake on one of those seven points. Please repeat from the (1) to (7) point again.
Method 3:
- Press the Resume button 4 times (each time the Resume button is pressed, the power indicator changes color).
- Press the Power button once to confirm the selected action (reset the absorber counter).
- Press the Power button to turn off the printer.
- Turn on the printer again and now the printer is ready for use.
[Note]: Another command for points (1) of Method (3):
- Press the Resume Button: 1 times [Light is Orange] – the function for Service test print (load paper before do it).
- Press the Resume Button: 2 times – Green – EEPROM information print (load paper before do it).
- Press the Resume Button: 3 times [Light is Orange] – the function for EEPROM initialization.
- Press the Resume Button: 4 times [Light is Green] – the function for Waste ink counter setting.
- Press the Resume Button: 5 times [Light is Orange] – the function for Destination setting (then Press Power, Press Resume 3 times).
- Press the Resume Button: 6 times [Light is Green] – the function for Print head deep cleaning.
- Press the Resume Button: 11-13 times – [Light are Orange, Green, Orange ] the function for Return to menu selection.
- Press the Resume Button: 14 times [Light is Green] the function for Left margin correction.
[Note]: If you still meet the error in your printer, solve and repeat to reset its acording this intruction.
No comments:
Post a Comment